HEXISOAP - Soapy solution to help apply film
Soapy solution to help apply film
20 people are viewing this right now
HEXISOAP
Hurry up! Only
100
item(s) left in Stock!
HEXISOAP
HEXISOAP is a concentrated soap facilitator for the installation of adhesive films applied in wet conditions.Dilute HEXISOAP with water in a sprayer:For BODYFENCE®: 1 pump per recommended litre of waterOther films to be installed in wet conditions: 2 to 4 pumps per recommended litre
Concentrated liquid soap to be diluted before use Application aid, particularly recommended for wet application of protective films such as BODYFENCE Available in 1 litre size (sold with a pre-measured squeeze cap)
How to use it1. Dilute HEXISOAP with water in a spray bottle. The recommended dosage for 1 litre of water varies depending on the film for wet application:BODYFENCE > 1 squeegeOther films > 2 to 4 squeezes2. Spray your diluted solution over the entire surface to be wrapped. Also remember to moisten each side of the film.
HEXISOAP
Data sheet
- https://hexis-graphics.com/documents/fichestechnique/document_en/aut_HEXISOAP_FTP_anglais.pdf
- HEXISOAP
- other
- HEXISOAP : Soapy solution to help apply film
- HEXISOAP